enter the content block
HomeProductsBrandFinesilDIY Home Repair

Finesil

DIY Home Repair

Silicone

DIY Home Repair

DIY Home Repair
 

3366A+
Long Lasting Anti-Mold Silicone

Finesil 3366A+ Long Lasting Anti-Mold Silicone-FinesilSilicone
Product Properties
Passes 4 major certifications, indicating high quality.
It is guaranteed that no mold will be grew within 7 years.
Effectively prevent the growth of mold on caulking materials.
The non-polluting formulation is used. It is insoluble and will not be released.
It will not cause inhalation injuries to workers.
You do not have to worry about harmful residues when it is used indoor.

How to use
When cleaning a surface, make sure there is no oil stain and water.
Fill gaps with silicone.
Smooth out the surface with the tool.
After 24 hours, do not touch silicone to avid deformation. 7 days later silicone rubber will be completely cured to maximize bonding and sealing capability.
Notes
Store it in a cool place without direct sunlight.
If the bonding surface is engineer plastic or other materials that are not easily bonded to silicone rubber, use the primer appropriately. After use, make sure good ventilation is provided and avoid heat source.
After use, squeeze silicone out for 1 cm, replace the cap, and make sure there is no air in the front end to put off hardening.
Avoid direct contact with your skin. If it comes into contact with your skin, wipe it out and wash your skin.
Keep it away from the children.
Specifications
Ingredients:Silicone, anti-mold agent
Capacity:90ml ± 5%
Included with the pointed nozzle
Origin:Taiwan
Storage period:2 years under the room
Date of manufacturing:As shown on the package
 

Tile Grout Refresh

Finesil Tile Grout Refresh-FinesilSilicone
Product Properties
Eliminate 99.99% mold in tile gaps.
Anti-mold, waterproof, anti-bacteria, anti-fouling.
Prevent the growth of water scale and mold.
No dirt will be accumulated in tile gaps and it is easy to wipe and wash.
It is easy to apply
Suitable for gaps in tiles, mosaic, stone, marble.

How to use
Before use, rinse tile gaps and dry them off.
Caulk tile gaps evenly.
Leave it for 2~3 about hours until it is completely cured.
Avoid contact with water within 2~3 days after use.
Notes
Make sure there is good ventilation during use.
Avoid contact with water within 2~3 days after it is applied. Do not use hot water for cleaning.
Store it in a cool place without sunlight and high temperature.
Keep it away from the children.
Specifications
Ingredients:Water-based resin, ceramic powder, RO water
Color:White
Capacity:170ML
Origin:Taiwan
Storage period:3 years
 

196 Professional
Acrylic Sealant

Finesil 196 Professional Acrylic Sealant-FinesilSilicone
Product Properties
The water-based acrylic sealant is made by mixing water-based acrylic resin is mixed with other fillers. It is non-toxic and does not cause population during work. It is 1-part, has good sealing ability, and can be easily used out of box.
It is flexible and can prevent cracks. It is water-based without silicone, and paintable after curing. It can be applied in joints of wooden partitions, lightweight steel frame, brick wall, and wooden wall.
Good flexibility.
Non-toxic and no odor.
Waterproof effect.
Good adhesion and sealing.

How to use
Clean dirt and oil stains in gaps.
Remove the cap and cut an appropriate from the end of the pipe.
Fill sealants in gaps.
After being cured completely, it can be painted or coated.
It takes 30 minutes to form a coating on the surface. It takes 7~21 days for complete curing (based on the thickness and temperature).
Notes
Store it in a cool place without direct sunlight.
Avoid contact with your eyes. If it comes into contact with your eyes, seek medical advice immediately.
Keep it in a place away from the children.
Specifications
Color:White/transparent Capacity:170ml ± 5% Origin:Taiwan Storage period:3 years under the room temperature
 

All Purpose Waterproof

Finesil 水剋星-FinesilSilicone
Product Properties
Anti-leakage, waterproof, and permanent curing after bonding
Home waterproof and repair. Even on moist surface, it has high bonding strength. Paintable, great weatherability, vibration resistance, waterproof effect, high quality, pollution-free, formaldehyde free and low TVOCs.
Excellent waterproof and repair effect.
On moist surface, it has great bonding strength.
It can withstand a load of 34kg/cm² when fully cured 3.48 hour later.
Excellent weatherability and UV resistance.
Paintable after curing.
Neutral and odor free.
It has ecological advantages and no harmful substances are added: without isocyanate, organic solvents, halogen, and acid substance.

How to use
Clean the surface for caulking properly, and make sure there is no oil stain and water.
Fill gaps with silicone.
A coating is formed on the surface after 5~10 minutes
After 48 hours, it will be completely cured to maximize bonding and sealing capability.
Notes
After opening, use it up as soon as possible.
Store it in a dry and cool place without direct sunlight.
Avoid contact with your eyes. If it comes into contact with your eyes, seek medical advice immediately.
Avoid contact with food.
Keep it away from the children
It is impossible to bond with PP, PE, fluorocarbon materials, and PTFE materials.
Specifications
Color:White
Capacity:50ml
Origin:Taiwan
Storage period:2 years
 

Efflorescence Cleaning Spray

Finesil Efflorescence Cleaning Spray-FinesilSilicone
Product Properties
Remove flaky paint, efflorescence, and cement ashes in various cement building, and do cleaning and preparations before tile repairs.
Effectively remove flaky paint, efflorescence, and cement ash.
Non-toxic natural botanical formulation.
Do not contain any corrosive substance or the one harmful to the environment.
Excellent cleaning effect.
Easy-to-use and no scrubbing is required.
Penetrate through the cement to remove calcium carbonate
Effectively inhibit growth of efflorescence.

How to use
Remove flaky paint and cement ash (until cement is visible)
Spray it direct at the area damaged by water (It is normal to see bubbles).
Wait until the wall is complete dry (the drying time vary depending on the environment).
Notes
Store it in a dry and cool place without direct sunlight.
Avoid contact with your eyes. If it comes into contact with your eyes, seek medical advice immediately.
Keep it away from the children.
Do not mix it with chlorine bleach. If you accidentally mix it with chlorine bleach, toxic gases may be released.
Specifications
Ingredients:Natural eco-friendly organic acid, penetrating agent, water
Capacity:300ml
Origin:Taiwan
Storage period:2 years
Date of manufacturing:As shown on the package
 

Wall Mending Ointment

Finesil Wall Mending Ointment-FinesilSilicone
Product Properties
Effectively repair water damage, dents, holes, cracks, graffiti, and dirt on the wall.
Non-toxic and formaldehyde free.
It is easy to apply.
Paintable and no color difference on the wall.
Excellent waterproof and repair effect.
Flexible and anti-vibration after curing. No cracks on the wall.
Anti-fouling finish for a clean and smooth surface.

How to use
Apply wall mending ointment in gaps to be repaired.
Smooth out wall mending ointment evenly using the spatula.
After curing, no cracks will be found on the wall.
If there are deep dents or peeled paints, increase the dosage and repeat the step.
※※ It is very effective to repair a wall with waterproof effect but you cannot fix the issues inside the wall.
※※ If there are deep dents or peeled paints, increase the dosage and repeat the step.
Notes
After opening, use it up as soon as possible.
Store it in a dry and cool place without direct sunlight.
Avoid contact with your eyes. If it comes into contact with your eyes, seek medical advice immediately
Keep it away from the children.
Specifications
Ingredients:Water-based eco-friendly resin, powder filler, and primer.
Capacity:220g
Origin:Taiwan
Storage period:2 years
Date of manufacturing:As shown on the package
 

Wall Mending Ointment

Finesil Wall Mending Ointment-FinesilSilicone
Product Properties
Effectively repair water damage, dents, holes, cracks, graffiti, and dirt on the wall.
Non-toxic and formaldehyde free.
It is easy to apply.
Paintable and no color difference on the wall.
Excellent waterproof and repair effect
Flexible and anti-vibration after curing. No cracks on the wall.
Anti-fouling finish for a clean and smooth surface.

How to use
pply wall mending ointment in gaps to be repaired
Smooth out wall mending ointment evenly using the spatula.
After curing, no cracks will be found on the wall.
If there are deep dents or peeled paints, increase the dosage and repeat the step.
※※ It is very effective to repair a wall with waterproof effect but you cannot fix the issues inside the wall.
※※ If there are deep dents or peeled paints, increase the dosage and repeat the step.
Notes
After opening, use it up as soon as possible.
Store it in a dry and cool place without direct sunlight.
Avoid contact with your eyes. If it comes into contact with your eyes, seek medical advice immediately.
Keep it away from the children.
Specifications
Ingredients:Water-based eco-friendly resin, powder filler, and primer
Capacity:350ml、750ml
Origin:Taiwan
Storage period:2 years
Date of manufacturing:As shown on the package
 

5842A
Heat Resistant Silicone

Finesil 5842A Heat Resistant Silicone-FinesilSilicone
Product Properties
Unlike the general silicone in the market, which is resistant up to a temperature of 150℃, it is resistant to a temperature of more than 200℃, or even 300℃ at sealed gaps of the exhaust duct or automobile engine.
In addition to our long-term research and development and testing, the SGS test demonstrates that it has a heat resistance effect up to 300℃ (this temperature may vary depending on the use condition).

Applications
Sealing, reinforcement, packing for the car engine.
Sealing in smoke and ventilation pipelines or fitting connectors.
Oven door or window adhesive/sealant.
Caulking, bonding, and sealing in the industrial high-temp pipeline system.
Industrial furnace or boiler door or window adhesive/sealant.
Applicable materials
Aluminum, iron, glass, stone, polycarbonate, PVC (may need primer)
Specifications
Color:Aluminum silver and brick red
Capacity:300ml(80ml), 12 pcs/box (20 pcs/box)
Storage period:12 months from the date of manufacturing (below 25℃)
 

High Load A Non-toxic Silicone

Finesil High Load A Non-toxic Silicone-FinesilSilicone
Product Properties
After curing, it can withstand a load of 43kg per cm2. Temporary fixing is not needed.
Suitable for fixing of item storage containers and bonding of construction materials.
Suitable for the tile, glass, metal, cement, stone, PC plate, and wooden plate.
On moist surface, it has great bonding strength.
Neutral, pollution-free without organic solvents, halogens, and acid chemicals.
Excellent resistance to weather and UV radiation, which effectively reduce dust adhesion.

How to use
Spread the sealant evenly on the surface.
It is recommended to apply 2g every 10 cm².
Notes
After opening, use it up as soon as possible.
Store it in a dry and cool place without direct sunlight.
Avoid contact with your eyes. If it comes into contact with your eyes, seek medical advice immediately.
Avoid contact with food and keep it away from the children.
It is impossible to bond with PP, PE, fluorocarbon materials, and PTFE materials.
Specifications
Capacity:50ml ± 5%
Ingredients:Modified silicone rubber
Origin:Taiwan
Storage period:2 years under the room
Date of manufacturing:As shown on the package